• 24-hour global service hotline+86 (020)31523725, 37523936, 31523097

News

Home > News> Industry news

Plastic science - plastic reinforcement materials

release time:2023-12-12publisher:

What is plastic reinforcement material?

Reinforced plastics are plastics containing reinforced materials and are an important polymer composite material. Reinforced plastics are divided into reinforced thermosetting plastics and reinforced thermoplastics, mainly thermosetting. The reinforcement materials used are metal materials, non-metal materials and polymer materials, and the three are mainly fibrous materials.

09.jpg

Classification of reinforced plastics

A. According to the shape of the reinforcement material is divided into:

1) granular reinforced plastics

2) Fiber reinforced plastics

3) Sheet reinforced plastics

B. According to the material of the reinforcement material:

1) Cloth, asbestos reinforced plastics

2) Inorganic mineral filled plastic

3) Glass fiber reinforced plastics

4) SMC, BMC and other special fiber reinforced plastics

5) Metal fiber reinforced plastics

18.jpg

Glass fiber reinforced plastics

Glass fiber reinforced plastic (also known as glass fiber reinforced plastic), is a variety of, good performance, a wide range of composite materials. It is a new functional material made of synthetic resin and glass fiber by composite technology.

1. High strength and high stiffness

The strength and stiffness of glass fiber reinforced plastic products are much higher than other plastic products. Compared with the metal has the same or better mechanical properties, the weight is only about 1/4 to 1/5 of the metal.

2. Corrosion resistance

Glass fiber reinforced plastic products are not susceptible to corrosion and oxidation, and can be used for a long time in humid and corrosive environments.

3. Good insulation performance

Glass fiber reinforced plastic products have good insulation properties, mainly used in electronic devices, insulation components and other aspects.

4. Good plasticity

Glass fiber reinforced plastic products can be adjusted according to the needs of its performance, relatively easy to process, molding.

Guangzhou Best Rubber & Plastic Co., Ltd. has more than 20 years of experience in the processing of plastic reinforcement materials, more than 2,000 square meters of physical processing plants, as well as professional production equipment and professional production design team, can bring you satisfactory products and services.

136.jpg

Causes of corrugation caused by glass fiber reinforced plastics

1, the pouring gate is small, resulting in the spray phenomenon in the mold cavity

Solution: The gate size should be modified or the injection pressure should be reduced.

2. The flow path is tortuous, narrow, poor roughness, and insufficient supply of rubber material

Solution: The runner should be modified and its roughness reduced, so that the supply of rubber material is sufficient.

3, the section thickness of the parts is not uniform, the area is large, the shape is complex,

Solution: The parts should be set so that the thickness of the section is consistent, or the protruding plates and raised lines on the parts should be removed.

4, mold cooling system is improper or mold temperature is low

Solution: Adjust the cooling system or increase the mold temperature.

5, melt temperature, mold or nozzle temperature is low

Solution: The melting tube temperature and nozzle temperature should be increased.

6, injection pressure, speed setting is too small

Solution: The corresponding parameter Settings should be increased.


Title

Guangzhou?Best?Rubber?And?Plastic?Co.,Ltd.

  • Tel:(020)31523725, 37523936, 31523097
  • Fax:(020)37403270, 37403280
  • Email: sales@gz-best.com/export@gz-best.com
  • Add:No. 21 Liangtian Middle Road, Baiyun District, Guangzhou City, Guangdong Province
  • Add:25-27 Yanling Road, Guangzhou